Saving water means saving energy. With EcoSmart, this happens automatically.

EcoSmart: Save water, protect the climate

Hansgrohe's trendsetting technology 

Climate protection starts with showering, ecological behaviour to hand washing. As a champion of the value of water, Hansgrohe assumes a pioneering role in dealing with this precious resource. Hansgrohe mixers and showers which are fitted with EcoSmart technology require up to 60% less water than conventional products. Calculate your savings potential online now.

Your top selling point for customer consultations: 

  • lower water consumption = lower energy requirement.
    That means: fewer CO2 emissions and lower costs.

EcoSmart showers – facts and functionality

The daily requirement for shower water is reduced by up to 60%: thanks to a sophisticated flow limiter, special jets and the admixture of air. Therefore the Raindance EcoSmart overhead and hand showers from Hansgrohe require only 9.5 litres of water per minute, while the Crometta 85 Green overhead and hand showers use only 6 litres of water per minute. It does not matter how high the water pressure is: a “precision O-ring” reacts flexibly to the water pressure and adjusts the water quantity. If the pressure is high, the ring makes the opening smaller. If it is low, it expands the opening.

EcoSmart basin mixers – facts and functionality

Approximately 13 litres of water per minute run through a conventional basin mixer. Thanks to EcoSmart technology, water consumption in all Hansgrohe basin mixers is reduced by up to 60 percent*, to around 5 litres per minute. How does that work? By adding air and by means of a special flow limitation system. The EcoSmart aerator is integrated into the spout of the basin mixer and enriches the water with air. The result is a full, bubbling water jet. A “precision elastomer” responds automatically to different water pressure and alters its shape. It limits the flow, thus constantly saving drinking water.
* without EcoSmart: 13 litres per minute at 0.3 Mpa (3 bar)

Water saving technologies that quickly pay off

Anyone looking for a real water-saving miracle should use non-contact infrared sensor mixers. These mixers ensure that water only flows when you really need it. Consumption is controlled by smart sensor technology, with an extremely short run-on time, and limits the water flow to approximately 5 litres per minute.

    Hansgrohe EcoSmart logo

Sustainable design and consumption: all EcoSmart showers and mixers at a glance

View all the latest Hansgrohe showers and mixers with EcoSmart technology here. Also: further information on the subjects of climate protection and saving water with Hansgrohe.

Project business: low operating costs – rapid amortisation

In the project business in particular, water and energy savings are key criteria when it comes to furnishing. In buildings with lots of bathrooms and WCs (hotels, public facilities), the savings potential is multiplied when EcoSmart products are installed. Since the operating costs are reduced to such an extent, investments are often amortised within just a few months. The technology is automatically integrated in all Hansgrohe mixers and lots of showers. No extra installation costs or effort are involved. When it comes to EcoSmart products, there are numerous complete ranges of showers and wash basins available for planners and architects to find everything they could possibly need.